Manufacturing Facility
We follow an appropriate manufacturing process right from procuring raw material to dispatching final product to the customers. At the stage of procurement of raw material various stages are taken care of cracks, seams, overlapping, pitting, as well as dimensionally. A chemical & physical test is carried out before selecting the raw material. Following are the stages that are followed to acquire a perfect product:
- Heat Treatment
- Welding
- Forging
- Machining
- Pickling
Once the forging and heating treatment process is done, all the pipes fittings, flanges, fasteners, etc. are sent for machining as per dimensional codes. Further a specialized Q.C engineer keeps a constant vigil on every machining operation. GO and NO-GO gauges are used for the fittings of flanges and similar other.
Finishing All the tubes and pipes are picked and the scale is removed that is
formed during forging/ forming operations. Further Grinding operation
is done to remove the die mark and inside / outside burrs formed during
forming & machining operation. Dimensional check is carried out
finally & recorded.
Marking Once all the products are finalized and finished a dimensional check is
done on all the fittings with is then stamped /marked for size,
schedule, Fittings specification, Heat mark & batch number.
Certificate All the products are furnished with manufacturer’s test certificate.
The certificate connotes important data such as raw material
composition and that heat treatment is done.
